Hold down the silver trigger to link the Thermal Scan Device, press continue.
Ask Patient to face the monitor.
Untie the Patient’s gown.
Hold down the silver trigger on the scanner.
While holding the trigger, place device at the S1 level. Do not release the trigger until the scan is complete.
Roll the scanner up the spine to the Atlas level, and then release the trigger. When you are finished, click next.
Scan Vision –Muscle Scan:
Take a contact solution pad out of the 3G quick scan container.
Place the pad on top of the container.
Dab the probes from each scanner on the pad (IN BETWEEN EVERY READING)
Place the device on the Patient at the C1 level, watch for the bars to begin reading then press either button on the scanner to capture the measurement. Follow the prompts until the scan is complete. Pat each of the Static devices’ probes on the solution pad before each section.